86 lines
3.6 KiB
INI
86 lines
3.6 KiB
INI
;
|
|
; JMicron JMB38X Driver Setup Ini File
|
|
;
|
|
|
|
[Startup]
|
|
; Product Specific Setup Package GUID
|
|
ProductGUID={26604C7E-A313-4D12-867F-7C6E7820BE4C}
|
|
|
|
[Install_Setting]
|
|
;Customize INF file name
|
|
InfName=jmcr_to.inf
|
|
|
|
; If SupportDriverPreInstall = 1, indicate that setup package "support driver preinstall". Otherwise, indicate NOT support.
|
|
; Notice: If Device has in-box driver, PreInstall would not work as expected with non-WHQL driver.
|
|
SupportDriverPreInstall=1
|
|
|
|
; If RebootNotRequiredAfterSetupDriver = 1, indicate that "Reboot is NOT required after driver setup". Otherwise, reboot is required.
|
|
RebootNotRequiredAfterSetupDriver=0
|
|
|
|
; If RescanAfterUninstall=1, setup program will Notify OS to Rescan Device after uninstall succeed.
|
|
RescanAfterUninstall=1
|
|
|
|
; If RemoveAllDriverFromDriverStore =1, setup program would Remove all installed inf of the same inf name during uninstall
|
|
RemoveAllDriverFromDriverStore=1
|
|
|
|
; If RemoveInstalledPackageFirst=1, setup program would request to remove installed version before installation.
|
|
; Otherwise, setup program would overwrite registry and files of installed version.
|
|
RemoveInstalledPackageFirst=0
|
|
|
|
; if WaitDiskDriverInstall=1, indicate that the driver and setup program will wait until Disk driver is installed ready
|
|
WaitDiskDriverInstall=0
|
|
|
|
; CustomizedSettingCount indicate "the total number of CustomizedSetting".
|
|
CustomizedSettingCount=21
|
|
|
|
; [CustomizedSettings Definition]
|
|
; CustomizedSetting1: Customized Setting Flag. Bit Defintion would be appened later
|
|
; CustomizedSetting2: LED Pulse Width. DWord value.
|
|
; CustomizedSetting3: SD/MMC Slot A Pull-High/Pull-Low Setting
|
|
; CustomizedSetting4: SD/MMC Slot B Pull-High/Pull-Low Setting
|
|
; CustomizedSetting5: MS Slot A Pull-High/Pull-Low Setting
|
|
; CustomizedSetting6: MS Slot B Pull-High/Pull-Low Setting
|
|
; CustomizedSetting7: XD Pull-High/Pull-Low Setting
|
|
; CustomizedSetting8: SD/MMC Timing Delay Setting
|
|
; CustomizedSetting9: MS Timing Delay Setting
|
|
; CustomizedSetting10: IC Driving Setting
|
|
; CustomizedSetting11: D3E Waiting Minutes (Max 65535)
|
|
; CustomizedSetting12: Wait Disk Driver Ready Time
|
|
; CustomizedSetting13: SD/MMC Timing Delay Setting for 388/389
|
|
; CustomizedSetting14: MS Timing Delay Setting for 388/389
|
|
; CustomizedSetting15: Default IC Driving Setting for SD/MMC/MS of 388/389
|
|
; CustomizedSetting16: IC Driving Setting for MSProHG 8-bit Mode on 388/389
|
|
; CustomizedSetting17: Default IC Driving Setting for xD of 388/389
|
|
; CustomizedSetting20: Default IC Driving Setting for xD of 385/380
|
|
; CustomizedSetting21: Customized Setting Flag 2
|
|
|
|
; [CustomizedSetting1 Bit Definition]
|
|
; Bit[ 1] (0x00000002): Set JMicron Disk Drive Icons
|
|
; Bit[ 3] (0x00000008): SD Card Handle by SDA driver
|
|
; Bit[ 4] (0x00000010): Enhance xD Write Performance
|
|
; Bit[ 5] (0x00000020): Support D3E // Need BIOS Supporting
|
|
; Bit[11] (0x00000800): Report All Disk to install disk driver when install JM 38X driver
|
|
; Bit[14] (0x00004000): Do not modify the Controller Capabilities Reported by BIOS
|
|
|
|
CustomizedSetting1=0x02923032
|
|
CustomizedSetting2=0x4000
|
|
CustomizedSetting3=0x50800F1F
|
|
CustomizedSetting4=0x00000F1F
|
|
CustomizedSetting5=0x5f8f0000
|
|
CustomizedSetting6=0x0f0f0000
|
|
CustomizedSetting7=0x4F8F1030
|
|
CustomizedSetting8=0x000337a3
|
|
CustomizedSetting9=0x00004000
|
|
CustomizedSetting10=0x01020101
|
|
CustomizedSetting11=0x00000010
|
|
CustomizedSetting12=0x0000000F
|
|
CustomizedSetting13=0x03333aa3
|
|
CustomizedSetting14=0x00BA4000
|
|
CustomizedSetting15=0x03043333
|
|
CustomizedSetting16=0x03073333
|
|
CustomizedSetting17=0x04053333
|
|
CustomizedSetting18=0x00000014
|
|
CustomizedSetting19=0x00000100
|
|
CustomizedSetting20=0x02020101
|
|
CustomizedSetting21=0x00007001
|